Category

Plates and Screws

Plates and Screws

DRPx

The OIC DRPx Distal Radius Plate represents a best-in-breed approach to wrist fracture and care. As distal radius fractures have become one of the most common injuries treated with internal fixation, OIC supports surgeon and facility in achieving great outcomes under increasing reimbursement pressures. We believe in creating better value for the implants you already know and use on an everyday basis.

Features

  • Type II Anodized Titanium
  • Pre-contoured anatomic plates.
  • Color coded for easy identification: Right or Left
  • Low profile plate and screw design to minimize soft tissue irritation
  • Variable angle (up to 15°) and fixed angle locking options for maximum flexibility
  • Distal window for graft and/or fracture visualization
  • Indicator lines for improved guidance and adjustment
  • Variety of optional screw targeting methods to maximize surgeon preferences
  • 3.5mm locking and non-locking shaft screws

Variety of distal screws:

  • 2.0mm Smooth Locking Pegs
  • 2.3mm Threaded Locking Screws
  • 2.6mm Non-Locking Screws
  • 2.6mm Variable Angle Compression Screws

DSP

The OIC Dorsal Spanning Plate completes OIC's distal radius plating system, DRPx. Simple and intuitive, the DRPx plating system is not just elegantly designed, but is now surgically comprehensive as well. While indications may vary between a volar or dorsal approach, it only takes one system to deliver on high value.

Features

Type II Anodized Titanium

  • Pre-contoured anatomic plates
  • Low profile plate and screw designed to minimize soft tissue irritation
  • Variable angle (up to 15°) and fixed angle locking options for maximum flexibility
  • Pre-contoured 6° volar angulation bend
  • Variety of optional screw targeting methods addresses surgeon preferences
  • 3.5mm locking and non-locking radius screws
  • 2.6mm locking and non-locking metacarpal screws
  • Ergonomic handle facilitates plate insertion

Clavicle

The Clavicle Locking Plate and Screw Set from OIC raises the bar for high-value implants. Considered the most unique bone in the body, the anatomy of the clavicle presents unique challenges in gaining successful fracture repair. OIC’s anatomic clavicle plates meet the needs of virtually all fracture patterns while giving surgeons the options needed for reliable clinical outcomes.

Features

  • Contoured, anatomic distal plates
  • Contoured, anatomic medial plates
  • Color-coded plates and screws for easy identification
  • 2.5mm and 3.5mm locking and non-locking screws
  • Fixed and Variable angle locking holes that accommodate 15 degrees of freedom
  • Optional hole covers for increased fatigue strength
  • Leverages the OIC Small Fragment Lock Plating System’s instrumentation and screws for instant surgeon and staff familiarity
  • Made of titanium

Distal Fibula

In our endless pursuit for creating value, OIC has produced a neutral anatomic plate that delivers big on outcomes and savings. We’ve spent the time on design so you can focus on the fracture. As part of the OIC small fragment plating system, the OIC distal fibula plate is second to none in utility and value.

Features

  • Anatomic low profile plates
  • Locking and non-locking option at every hole
  • 2.5mm Locking and Non-Locking holes distally
  • 3.5mm Locking and Non-Locking holes proximally
  • Fixed and variable angle locking options at every hole, accommodating 15 degrees of freedom
  • Leverages the OIC Small Fragment Lock Plating System’s instrumentation and screws for instant surgeon and staff familiarity
  • Made of titanium

Proximal Humerus

Proximal humerus fractures present incredible challenges in achieving optimal clinical outcomes. The OIC Proximal Humerus plate is in lock step with surgeons’ goals for internal fixation, focusing on prevention of subacromial impingement and varus collapse of the humeral head. Furthermore, suture holes allow surgeons to place sutures addressing tuberosity repairs post humeral-head fixation.

More innovative than its design, the OIC Proximal Humerus plate brings innovation to value in the operating room that all patients appreciate. It’s a new world in healthcare where facility and surgeon can demand the highest quality and value in a single implant that only OIC can deliver.

Features

  • Pre-contoured anatomic left and right plates minimize need for deltoid release
  • Unique convergent and divergent screw trajectories create exceptional pull-out strength
  • Options for locking and non-locking fixation in each hole
  • K-Wire holes for plate positioning and fracture reduction
  • Optional proximal screw targeting guide for easy screw insertion
  • 3.5 hexalobe locking and non-locking shaft screws (10mm – 60mm in length)
  • Leverages the OIC Small Fragment Lock Plating System’s instrumentation and screws for instant surgeon and staff familiarity
  • Made of Titanium Alloy

Proximal Tibia

In order to get the best value today, sometimes you need to step back and take in the bigger picture.

A successfully healed proximal tibia fracture can ward off arthritis and probability for knee arthroplasty down the line. With one chance to get it right, OIC has produced anatomic lateral and posterior-medial proximal tibia plates with value that lasts a lifetime.

To provide incredible short-term value is not enough – that’s why we dedicate all of our resources to design, quality and ease of use.

Features

  • Lateral and Posterior-medial anatomic plates
  • Low Profile Design
  • Color-coded plates and screws for easy identification
  • 3.5mm Locking and non-locking option at every hole
  • Fixed and variable angle locking options at every hole, accommodating 15 degrees of freedom
  • Leverages the OIC Small Fragment Lock Plating System’s instrumentation and screws for instant surgeon and staff familiarity
  • Made of titanium

Distal Tibia

OIC introduces its anterolateral distal and medial distal tibia plates – a welcomed addition to the OIC small fragment plating system. Leveraging instrumentation used with all OIC small fragment plates, OIC ankle plates refuse to accept the status quo. The result is better value in healthcare for all.

Features

  • Medial and Anterolateral Distal Tibia anatomic plates
  • Low Profile design
  • Color-coded plates and screws for easy identification
  • 2.5mm Locking and Non-Locking holes distally
  • 3.5mm Locking and Non-Locking holes proximally
  • Fixed and variable angle locking options at every hole, accommodating 15 degrees of freedom
  • Leverages the OIC Small Fragment Lock Plating System’s instrumentation and screws for instant surgeon and staff familiarity
  • Manufactured of Type II Anodized Ti-6Al-4V
Orthopaedic Implant Co.